Home > Gas Detectors > Fixed Gas Detection Systems > GfG Instrumentation > Stand Alone Systems >

2210-030 GfG Dynagard Single Point Fixed Oxygen O2 System
2210-030 GfG Instruments Dynagard 25 Series Single Point Fixed Oxygen O2 Monitoring System 2210-030


 
Base Price: $1,995.00

Availability: Usually Ships in 2 to 4 Weeks
Qty:

Description
 
Dynagard 25 Single Point Fixed O2 Monitoring System

2210-030 Dynagard 25 Single Point Fixed Monitor for O2 is the easiest detector to install and operate. Simply mount the detector, and apply power. The GfG utilizes Zirconia Oxygen sensor which typically has a 5 year sensor life and is unaffected by exposure to high concentrations of carbon dioxide, CO2. The sensor is not influenced from barometric pressure, humidity or temperature (unlike electro chemical Oxygen sensors).
Features
  • Easy installation
  • Local display, horn and strobe
  • Adjustable alarm points
  • On board relays for external controls
  • 4-20mA output
  • Extremely stable sensor responds quickly to any change in oxygen concentrations
  • Sensor is unaffected by exposure to high concentrations of CO2
  • 5 Year Oxygen O2 sensor life (typical)
  • No influences from barometric pressure, humidity or temperature
  • Minimal signal loss over time reduces the need for frequent calibration

Simple and Effective

The Dynagard 25 Series accurately measures oxygen levels. The unit offers a local display, a horn / strobe, and a linear 4-20 mA output. The Dynagard 25 Series offers a safe and reliable gas warning system.

  • Easy installation
  • Local display and horn / strobe
  • Adjustable alarm points
  • On-board relays for external controls
  • 4-20 mA output

Alarm Points

Each alarm can be adjusted separately. The alarm point values can be freely adjusted within the detection range of the transmitter. Every alarm point value can be set to over range / under range, latching / non-latching, or resettable / non-resettable.

Alarm Relays

The controller provides four voltage-free relays for the three alarms and one fault warning. The relays may be used to control additional alarm devices like lights or horns. They can even prompt specific counter measures to prevent or limit dangers from gases or vapors.

ZD 21 Zirconia Sensor

The comprehensive electronics allow for easy operation and maintenance and also increase operational safety and accuracy. In less than 2 seconds, the ZD 21 responds to an oxygen deficiency.


Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 2 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to use August 20, 2014
Reviewer: Karen Pearson from Phoenix, Arizona  
Working in a lab using LN2, we need a oxygen monitor.  This product just plugs into the wall for power and it works.  Fired right up and has been keeping us safe for a few months, no issues.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 oxygen gas monitor March 19, 2014
Reviewer: Ron De Mars from San Diego, CA  
All in one gas monitor!  Just hang it on the wall and plug it in.  All other monitors we researched needed to be installed by electrician.  Great product!

Was this review helpful to you?