Call us today at 562-809-3066
Submit Search
Compressed air or saturated steam is the power source for our Venturi Blower line. Small volumes of high velocity air (from the compressed air source) run through the casting and out the nozzle jets, creating a venturi action or pulling action that creates large volumes of air through the venturi and out the air diffuser.
A 1/2” Chicago (universal) connection hose with a “crows foot” connection is recommended from your air supply source to the side inlet connection. The compressor size required can be determined by checking the chart on air consumed at various inlet pressures. Operate this Venturi Blower on air or steam lines limited to 140 psi.
Choose from Galvanized Steel (with Aluminum Base) or Anti-Static Plastic Linear Low Density Polyethylene (LLDPE) Lightweight construction Convenient carry handles for one-person portability to any location No guards required Multiple inlet ports Sturdy steel galvanized steel diffuser All models include a crow’s foot inlet connection Static ground is attached to the base of all blowers Single piece cast aluminum inlet housing Does not require protective grills Noise level 82.5 dB
AIR FLOW
Inlet Pressure
AIR CONSUMED:
TOTAL AIR FLOW:
Models 9518-03, 9518-03S, 9518-13, and 9518-13S use 8 inch ducting.
Back to top