Home > Gas Detectors > Single Gas Detectors > Single Gas Detectors >

Bacharach PGM-IR Portable CO2 Refrigerants Gas Leak Detector 3015-8001
Bacharach PGM-IR Portable CO2 Refrigerant Gas Leak Detector 3015-8001


 
Base Price: $3,800.00

Availability: Usually Ships in 2 to 3 Weeks
Qty:

Description
 

Bacharach PGM-IR Portable Carbon dioxide CO2 Refrigerants Gas Leak Detector

3015-8001 Bacharach PGM-IR Portable Area Gas Monitor for CO2 Refrigerants Gases

Includes rechargeable battery pack, 120VAC charger and soft case.

PGM-IR CO2 Refrigerants Analyzer, a portable monitor for analyzing and checking Halogen based refrigerant levels. The unit can be used to identify low levels of refrigerant in the ambient air and help pinpoint the source of the refrigerant. In order to ensure the best accuracy and lowest detection limit possible, the unit will self zero every 4 minutes by pulling ambient air through a filter to provide a good “zero” refrigerant baseline for the unit. This allows the unit to sense very small concentrations of refrigerants as low as 1 ppm - reliably and quickly in the field. Additional features include datalogging of up to 200 readings, and a leak check mode with a "click rate" audible / visual alarms. The instrument uses a long life nondispersive infrared (NDIR) sensor and a rugged sample draw system, mounted in a durable carry case with a handle and includes a bag with shoulder strap.


The new PGM-IR Refrigerant Analyzer eliminates the bag refill cycle required in our workhorse PAGM Halogen Monitor. The user no longer needs to periodically exit a potentially contaminated area to fill the bag with fresh air and perform the purge/zero function. The unit continues to perform a zero check with fresh air, but pulls the air through a filter to remove contaminants for the purge/zero cycle. A new, ergonomic metal probe with plastic grip and an inline dust filter make it easier to reach into tight spaces.


Benefits:
  • Finds leaks as small as 1 ppm
  • The LCD Display shows concentration in real time
  • Very fast response and clearing times. Cut leak inspection times by 50%
  • Can locate leaks in small and hard to reach areas
  • Helps to prioritize where resources need to be spent


The unit features visual and audible tone indicators for preset gas
concentrations. The set points can be used as alarm warnings or as ranges for the unit's leak mode. In leak mode the audible tone will act as a click rate, increasing in frequency and volume as the concentration increases. Up to 200 readings can be stored and downloaded to a PC for later analysis. The unit will run over 10
hours on a fully charged battery.


** Note: This is a special order item, no returns accepted!

Share your knowledge of this product with other customers... Be the first to write a review