ION Science 4/QM-01 ION Science PID Response Check Pen. The pen provides simple, quick reassurance that your detector is responding to the presence of VOCs prior to use. For more information, support or questions on products, contact us and our experts will help you make an educated decision.

Base Price: $5.00

ION Science 5/OO-110 Cub VOC Internal Sensor Cap O-ring (15mm id x 1mm) Replacement. Critical component to ensures seal integrity of the PID sensor is maintained. Located in the PID sensor cap and seals against the PTFE disc filter

Base Price: $7.00

ION Science 5/OO-108 Cub VOC External Sensor Cap O-ring (18mm id x 1.5mm) Replacement. Critical component to ensures seal integrity of the PID sensor is maintained.

Base Price: $7.00

ION Science 880202 Tiger Series Inlet Probe Seal. This probe seals the inlet probe to the Tiger Instrument that was manufactured from 2016 on.

Base Price: $7.50

ION Science 846216 PID Sensor Electrode Stack Removal Tool allows safe, easy removal of the stack from the PID sensor.

Base Price: $10.00

ION Science 861235 Tiger Series Lanyard can prevent serious damage cause by accidental dropping of your Tiger LT, Tiger VOC detector or Tiger Select benzene detector by tethering it to the users wrist

Base Price: $10.00

ION Science 861245 Tiger Series Charger Strap can hold and the Tiger LT, Tiger VOC detector or Tiger Select benzene detector against the charge cradle. It is specifically useful if charging within moving vehicles

Base Price: $10.00

ION Science 861218 Tiger Series Filter Housing Clamp. The cap ensures the filter clamp is held in place ensuring a leak tight seal around the PTFE filter.

Base Price: $10.00

ION Science 846216 MiniPID Lamp Spring.

Base Price: $10.00

ION Science 871200 ION Science Cub Series Calibration Cup. This device ensures calibration gas is presented to the Cub’s MiniPID sensor evenly and at ambient air pressure.

Base Price: $10.00

ION Science 4/JLF-03 MVI Water Trap Filter PTFE 1.0 micron for Mercury Vapor Indicator. This PTFE filter protects the MVI portable mercury detector from ingress of dirt and water and should be replaced on a regular bases.

Base Price: $20.00

ION Science A-861482 Tiger Series Exhaust Barb. This adapter screws into the exhaust port of the instrument allowing gas to be captured into a sample bag via typical ¼” id pipe.

Base Price: $20.00

ION Science 871026 Cub Series Mini PID PTFE Filter Disc. This filter disc ensures a weather-proof barrier that blocks water but allows airborne gas access to the instrument’s PID sensor and can become dirty over time.

Base Price: $20.00

1/JAWU-01 ION Science 12 Volt Vehicle Power Adapter plugs into the Cub, Tiger and Tiger XT Series charge cradle allowing the instrument to be charged from a standard 12Vdc cigar / cigarette lighter socket. For support or questions on products, contact us and our experts will help!

Base Price: $30.00

Ship ICON Safety's ION Science A-871205 Accessory Kit for CUB Mini PID Photo Ionization Detector. PTFE filters and the related O-rings should be replaced after servicing the PID sensor.

Base Price: $30.00

ION Science A-871027 Cub PID for VOCs Sensor Cap Replacement. Sensor cap protects the PID from damage caused by day to day usage. For support or questions on products, contact us and our experts will help!

Base Price: $30.00

ION Science 861476 Tiger Series Calibration Adapter. Connects to 1/4" ID calibration tubing when calibrating using a gas flow regulator. Over-pressurizing the instrument is avoided by venting excessive gas via a small vent hole.

Base Price: $35.00

ION Science 861579 Tiger Series Filter Clamp. Filter Clamp simply holds the PTFE filter in place and ensure an air tight seal in conjunction with the O-ring. For use with Tiger Instruments manufactured from 2017 on.

Base Price: $35.00

ION Science A-846496 TVOC 2 Tiger LT PID Orange Electrode Stack Replacement. Orange electrode stack specifically designed for use within The ION Science PID sensor.

Base Price: $40.00

ION Science A-875417 TITAN Replacement Hydrophobic Filter is used externally to the instrument to stop airborne dirt and debris entering the gas detection system. The first line of defense in protecting your TITAN investment.

Base Price: $40.00

Shop at ICON Safety for ION Science A-849219 TVOC PID Zeroing Tool Kit. This TVOC calibration magnet is required to adjust parameters and step through the calibration routine.

Base Price: $40.00

ION Science A-861632 Tiger Series Premium PTFE White Filter Discs Pack of 10. These PTFE filters are hydrophobic; they allow gas to pass but block water. These filters protect instruments by filtering airborne debris and water ingress. For support or questions on products, contact us and our experts will help!

Base Price: $40.00

ION Science 861230 Tiger VOC Detector Angled USB cable allows a fast direct connection between Tiger instruments and a host computer and also allows data connects while the instrument is mounted on the cradle

Base Price: $45.00

ION Science 1/VS-22 110VAC Power Supply Adapter for use with ALL Tiger PID charging cradles P/N A-861220 and A-912258. Supplied with four plug heads, it allows direct connection to UK, US, European and Australian power sockets. For support or questions on products, contact us and our experts will help!

Base Price: $50.00

ION Science A-846267 Mini PID Replacement Electrode Stack Pellet Burnt 10.6eV ppb and 11.7eV White Corvus IAQ Monitor, Cub Mini PID, Tiger and Tiger Select

Base Price: $55.00

ION Science 1/VS-22 110VAC Power Supply Adapter for use with ALL Tiger PID charging cradles P/N A-861220. Supplied with four plug heads, it allows direct connection to UK, US, European and Australian power sockets.

Base Price: $55.00

ION Science 08024CFCO Nozzle Black for GasCheck IS Handheld Intrinsically Safe leak detector with ATEX approval.

Base Price: $60.00

ION Science Standard Nozzle Gray for ION Science GasCheck. 08024CPC8

Base Price: $60.00

ION Science 1/BH-01 GasCheck removable Alkaline AA Battery Holder for ION Science GasCheck Tesla, GasCheck G, or GasCheck IS

Base Price: $60.00

ION Science A-846627 Replacement white electrode stack replacement is specifically designed for use with the ION Science Falco fixed VOC monitor for the Falco 10ppm and 1000ppm instrument variants

Base Price: $60.00