 |
GasClip Technologies MultiGasClip IR with Pump
Motorized Sample Pump Multigas Monitor with a 50 hour continuous run on a single charge
GasClip Technologies MGC-IR-PUMP Multigas Monitor for H2S, CO, LEL and O2
MGC-IR-PUMP Multi Gas clip Pump by Gas Clip Technologies offers a easy to use, compact OSHA compliant four gas monitor for H2S, CO, LEL, & O2 with motorized sample draw pump, which as a run time of up to 50 hours of continuous monitoring utilizing the LED IR combustible sensor.
A New Option in Portable Gas Detection
Twice a day everyday... that's how often you have to charge most portable gas detectors, until now. Introducing the Multi Gas Clip Pump (MGC Pump) from Gas Clip Technologies, the only portable multi gas detector with an internal sampling pump that can go an entire work week without a charge.
A Long Lasting Family Tradition
The MGC Pump follows in a long line of portable gas detectors by Gas Clip Technologies that last and last and last. Being able to go a long time between charges is a family tradition.
Ergonomic design Makes for a Good Fit
The MGC Pump is also designed for comfort. The reduced sloping shape of the holding area at the bottom of the instrument makes the MGC Pump a comfortable fit in the hands of your workers. It is fully submersible and simple to operate. The MGC Pump offers a one button design and the largest LCD screen in the industry so it's easy to read.
Calibrate the MGC Pump Once Every 6 Months
Other multi gas detectors require calibration anywhere from 1 to 3 months. The MGC Pump can go 6 months without being calibrated. This is an added benefit of IR sensing technology because the LEL IR sensor is immune to pellistor sensor poisons such as silicone of H2S.
- 50 Hour of continuous run time
- 6 Month calibration cycle
- Able to take a sample from up to 75 feet away
- Low Maintenance
- Rugged Design
Part Numbers
MGC-IR-PUMP H2S, CO, LEL, & O2 Gas Monitor with LED infrared sensor and motorized sample pump
MGC-P-PUMP H2S, CO, LEL, & O2 Gas Monitor with Pellistor Cataylitc Bead sensor and motorized sample pump
| 4.7 x 2.4 x 1.2 in. |
| 7.7oz |
| 5% to 95% RH (non-condensing) |
| -4 to +122oF |
|
| IP66/67 |
| 1 |
| H2S, CO, O2 & LEL (Pellistor Catalytic Bead) H2S, CO, O2 & LEL (Infrared (IR) |
| 4 |
| Lithium-ion -LEL IR sensor 75 days continuous, LEL Catalytic Bead 26 hours |
| No |
|
|
| Yes |
| 4 Bright Red Alarm Bar LEDs |
| Yes |
| 95dB |
| Yellow Maintenance Notification LED |
|
| ANS/UL-913, ANSI/ISA-S12.13 Part 1,Class I, Div. 1, Gr. A,B,C,D, IECEx: Ex ia IIC T4 Ga |
| CSA, IECEx, |
| 25 Event log, 25 Bump Tests, 25 Calibrations, and Continuous 1 second data logging for > 2 months |
| No |
| N/A |
| Full two year warranty including sensors |
| Yes |
|
|
|
As good as the MGC 
