MST BA020- 20CFM Panel Mounted Breathing Air System with 5700 "CO" Monitor
MST BA020AMST-S1 | 20 CFM Panel Mounted Breathing Air Systems (Non-CO removal) Single Outlet with 5700 "CO" Monitor
Includes AC Adapter, Remote Alarm and Two 1/4" Foster Disconnects.
Removes water, particulates, hydrocarbons, oil smell and taste
Don't need 'CO' removal?
Our "BA" Series has twice as much charcoal than the others!
Our systems have an extra added "Fourth Stage" of activated carbon to reduce tastes and odors, and offer superior hydrocarbon removal.
For applications where CO removal is not desired, MST offers a complete line of Breathing Air Panels and airline monitor packages.
Like our CO removal equipment, our non-CO panels have significant advantages over competitive filtration systems. With a charcoal volume twice to eight times greater than other major suppliers, MST’s Breathing Air Panels provide superior removal capability for hydrocarbon tastes and odors.
Our unique air distribution baffle design maximizes charcoal absorption efficiency by providing even air distribution throughout the cartridges.
MST’s four-stage filtration system is standard on every portable model and provides extra protection for longer filter life and better filtering capabilities than most other comparable filtering systems.
Pre-filter dual stage element removes particulate down to 0.3 microns and coalesces liquid down to 0.75 microns, at an efficiency rating of 99.97% (D.O.P.)
A carbon monoxide monitor is available on every breathing air filter system we make to continuously monitor your breathing air for compliance with applicable standards. Monitors offer digital display, with both audio and visual alarms. All monitors utilize an electrochemical sensor to measure CO levels. The MST Breathing Air Panel Series can be supplied with or without carbon monoxide monitors, depending on end user’s specific situation. This option is available on request.
Rated Air Flow (Max) @ 100 psi 20 SCFM (9.4 L/s)
Operating Pressure 100 PSIG Dynamic (6.9 bar)
Inlet Pressure (Max) 150 PSIG Static (10.4 bar)
Outlet Pressure Range 0-125 PSIG (0-8.6 bar)
Operating Temp. Range 35-150oF (2-65oC)
Operating Relative Humidity 30-100% RH
(Inlet Air - Non Condensing)
Outside Dimensions 18.0"L x 15.0"W x 6.5"D
Weight (Including Monitor) 14 lbs
Replacement Filter Set FB020
Air from standard compressed air usually is contaminated with oil, water, dirt, rust, and often DEADLY CARBON MONOXIDE. The MST's RESPIRATORY PROTECTOR SERIES is a Four Stage Purification System that removes or reduces these contaminates and continually monitors the carbon monoxide level of the purified air.
5700 'CO' monitor is CSA Approved for Class1, Div. I, Groups A, B, C and D locations when utilizing 9 volt batteries.
Our Respiratory Protector Systems are designed to operate continuously. All other CO removal systems require drying time to remove moisture from saturated dryers. Continuous operation is possible with other companies' equipment, but they require twin towers, to alternate operation while moisture is purged...more equipment, more complexity, more cost!
At only 10lbs. the Portable Breathing Air systems are easy to get to the jobsite.