You are here: Home > Gas Detectors > Multi Gas Detectors > Multigas w/ CO2 - Carbon Dioxide Detectors

Portable Handheld Multigas Monitors with Carbon dioxide CO2

In some cases not only will you need to detect the common confined space gases (H2S, CO, O2, & LEL) you may also need to detect for CO2 with a NDIR sensor. If that is the case, some multigas monitors allow up to 6 different sensor combinations.

NDIR (Nondispersive Infared) sensors are used to measure Carbon dioxide CO2 concentrations in either ppm (parts per million) or % by volume. As gas enters into the NDIR sensor, the electronics measure the absorption of the characteristic wavelength of light. NDIR CO2 sensors are used mostly for dissolved Carbon dioxide for applications such as beverage carbonation, pharmaceutical fermentation and CO2 sequestration applications.

Depending on your specific application or needs, you can choose the appropriate gas detector and sensor combinations. If you are in need of help, please do not hesitate to contact us for assistance or guidance in choosing the proper gas detector.
Sort By:
Page of 1
GfG Instrumentation G460 Multigas Detector Exceptional Performance GfG G460 Multigas Detector

G460 by GfG is a rugged, compact instrument for simultaneous detection of up to 6 gases. Installed sensor options include infrared (NDIR) for CO2 and PID for VOC measurements.

Base Price: $605.00

(2)
MultiRAE Lite PGM-6208D Diffusion RAE Systems Diffusion Confined Space Monitor MultiRAE Lite Diffusion PGM-6208D by RAE Systems

Diffusion MultiRAE Lite by RAE Systems featuring a economical 1-6 sensor multigas monitor.

Base Price: $720.00

(1)
MultiRAE Lite PGM-6208 Confined Space Monitor by RAE Systems MultiRAE Lite PGM-6208 by RAE Systems

MultiRAE Lite with motorized sample pump by RAE Systems featuring an optional 10.6 eV 1-1000ppm PID sensor

Base Price: $830.00

(2)
MultiRAE PGM-6228 Confined Space Monitor RAE Systems PGM-6228 RAE Systems MultiRAE Multigas Detector

RAE Systems PGM-6228 MultiRAE Multi Gas Confined Space Monitor most advanced chemical detector for up to 5 gases and VOC PID Photo Ionization Detector

Base Price: $2,370.00

(2)
MultiRAE Pro PGM-6248 Confined Space Monitor by RAE Systems MultiRAE Pro PGM-6248 by RAE Systems

MultiRAE Pro Multi Gas Monitor by RAE Systems featuring a optional Gamma Radiation Sensor and three optional PID Sensors 1) 9.8eV 1-1000ppm Benzene 2) High Range 10.6eV 0.1-5000ppm PID Sensor, 3) ppb 10.6eV 0.01-2000ppm; 10ppb res.

Base Price: $3,610.00

(1)
BW Gas Alert Micro 5 IR for CO2 multigas monitor BW GasAlertMicro 5 IR/PID

Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro 5 Series. Including PID (VOC) or CO2

Base Price: $680.00

(1)
   
 

Carbon Dioxide Information


NDIR CO2 sensors are also used for dissolved CO2 for applications such as beverage carbonation, pharmaceutical fermentation and CO2 sequestration applications.

Carbon Dioxide or CO2 is typically detected by use of a NDIR (Nondispersive Infrared) sensor in the ppm range.


Carbon dioxide is one of the most frequently overlooked of all toxic gases. Even to refer to CO2 as a toxic gas is a surprise to many safety professionals. In Germany and Austria, regulations already require direct measurement of CO2 during most confined space entry procedures.


Typical uses for IR CO2 sensor is; Indoor Air Quality, Beverage & Brewery, Food Industry, Hospitals, Respirable Breathing Air Testing, Pharmaceutical Fermentation, Winery, Industrial Hygiene Services & CO2 Sequestration applications.


Depending on your specific application or needs, you can choose the appropriate gas detector and sensor combinations. If you are in need of help, please do not hesitate to contact us for assistance or guidance in choosing the proper gas detector.